PT-7500
Preguntas frecuentes y solución de problemas |
How do I make a label containing a barcode?
Please follow the steps below:
-
Set bar code parameters
- Press the Code key , then the Bar Code key .
- Press the left arrow key or the right arrow key until the parameter that you wish to change is displayed.
- Press the top arrow key or the bottom arrow key until the desired setting is displayed.
- Repeat the step "b" and the step "c" until all parameters are set as you wish.
- Press the Return key .
-
Enter the bar code data
- Press the Bar Code key .
- Type in the new bar code data or edit the old data.
-
Add the bar code to the text
-
Press the Return key to add the bar code to the text.
-
Press the Return key to add the bar code to the text.
The following bar code parameters are available:
Parameter | Settings |
PROTOCOL | CODE 39, I-2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, EAN128, CODE128 |
WIDTH (bar width) |
SMALL, MEDIUM, LARGE |
UNDER# (numbers printed below bar code) |
ON, OFF |
CHECK DIGIT* | OFF, ON |
*The CHECK DIGIT parameter is available only with the CODE 39, I-2/6 and CODABAR protocols.
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.