PT-7600
|
Preguntas frecuentes y solución de problemas |
How do I make a label containing a barcode?
Please follow the steps below:
-
Set bar code parameters
-
Press the Code key , then the Bar Code key .
-
Press the left arrow key or the right arrow key until the parameter that you wish to change is displayed.
-
Press the top arrow key or the bottom arrow key until the desired setting is displayed.
-
Repeat the step "b" and the step "c" until all parameters are set as you wish.
-
Press the Return key .
-
Enter the bar code data
-
Press the Bar Code key .
-
Type in the new bar code data or edit the old data.
-
Add the bar code to the text
-
Press the Return key to add the bar code to the text.
The following bar code parameters are available:
Parameter |
Settings |
PROTOCOL |
CODE 39, I-2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, EAN128, CODE128 |
WIDTH
(bar width) |
SMALL, MEDIUM, LARGE |
UNDER#
(numbers printed below bar code) |
ON, OFF |
CHECK DIGIT* |
OFF, ON |
*The CHECK DIGIT parameter is available only with the
CODE 39,
I-2/6 and
CODABAR protocols.
Si no obtuvo una respuesta, ¿ha revisado otras preguntas frecuentes?
¿Ha revisado los manuales?
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Modelos relacionados
PT-7500, PT-7600
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.