SDX125e Titanium
Preguntas frecuentes y solución de problemas
Can the cutting machine make half cuts/kiss cuts?
When the Half Cut is set to ON , the cutting machine automatically adjusts the blade extension for making half cuts. This means the machine measures the thickness of the material from the top of the mat to the top of the material and divides it by 2. If your backing/release paper and material are not the same thickness this may result in improper cuts. Adjust the cut pressure as needed. For details on Half Cut, refer to Half Cut (Kiss Cut) Settings . The cutting machine may not be able to make half cuts in some materials. In that case, adjust the Cut Pressure (Half Cut) setting.
To adjust the
Cut Pressure (Half Cut) setting, touch
in the home screen, and then adjust the setting for
Cut Pressure (Half Cut) .
Otherwise, touch
in the test screen, and then adjust the setting for
Cut Pressure in the settings screen.
Preguntas frecuentes relacionadas
Si no obtuvo una respuesta, ¿ha revisado otras preguntas frecuentes?
¿Ha revisado los manuales?
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Modelos relacionados SDX125, SDX125e, SDX125e Titanium, SDX125i, SDX125TS, SDX135PRO, SDX225, SDX225F, SDX230D, SDX230Di, SDX230DX, SDX325, SDX330D, SDX85, SDX85C, SDX85M, SDX85S
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Configuración / Ajustes Mantenimiento Tapete Patrón / Crear / Editar Función de corte Función de escaneado Red inalámbrica Otros Mensajes de error Pregunta general Pedrería Grabado en relieve Sello Adhesivo imprimible Laminado Pluma Perforación de papel Caligrafía Alimentador de bobina Delineado de imagen mejorado Otros Pregunta general Instrucciones / Solución de problemas Mensajes de error Máquina Accesorios CanvasWorkspace Artspira Pregunta general
Mensajes de error Pregunta general Solución de problemas
Configuración de la máquina / Ajustes Ajustes de una red inalámbrica Ajustes de CanvasWorkspace Otros
Limpieza
Pregunta general Instrucciones Solución de problemas
Pregunta general Instrucciones Solución de problemas
Pregunta general Instrucciones Solución de problemas
Instrucciones Solución de problemas
Pregunta general Solución de problemas
Instrucciones Solución de problemas
Lista de mensajes de error Mensaje de error en la pantalla de la máquina Mensaje de error / Código (EXXXXX / NXXXXX) Mensaje de error / Código (ErrSxx / NoteSxx) Mensaje de error (Otros)
Lista de mensajes de error Mensaje de error / Código (EXXXXX / NXXXXX) Mensaje de error / Código (ErrSxx / NoteSxx) Mensaje de error (Otros)
Tapete Cuchilla / Soporte Hoja de soporte Patrón / Crear / Editar Función de corte Accesorios / Consumibles Otros
Pregunta general
Instrucciones / Solución de problemas
Instrucciones / Solución de problemas
Instrucciones / Solución de problemas
Instrucciones / Solución de problemas
Información general Instrucciones / Solución de problemas
Información general Instrucciones / Solución de problemas
Instrucciones / Solución de problemas
Información general Instrucciones / Solución de problemas
Información general Instrucciones / Solución de problemas
Instrucciones / Solución de problemas
Hoja de soporte Cuchilla / Soporte Otros
Pregunta general
Instrucciones Solución de problemas
Introducción / Instrucciones
Introducción / Instrucciones
Introducción / Instrucciones