SE625
Preguntas frecuentes y solución de problemas
How do I attach or remove the embroidery frame ?
Attaching the Embroidery Frame
Wind and insert the bobbin before attaching the embroidery frame making sure to use the recommended bobbin thread. Check that there is enough thread in the bobbin.
Raise the presser foot lever to raise the presser foot.
Pass the embroidery frame under the presser foot.
If necessary, raise the presser foot lever even further.
Firmly insert the embroidery frame guide into the embroidery carriage frame holder from the top.
Line up the embroidery frame guide tabs and the embroidery carriage frame holder slots and push in until it clicks and stops.
(1) Embroidery frame guide tabs
(2) Embroidery carriage frame
holder slots
>> The embroidery unit is attached.
Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury.
Removing the embroidery frame
Raise the presser foot lever to raise the presser foot.
Press the part of the embroidery frame holder in the figure to the left side, and raise the embroidery frame.
(1) Lever
>> The embroidery frame will separate from the embroidery frame holder.
Remove the embroidery frame under the presser foot while raising the presser foot lever even further.
Do not hit the needle with your finger or the embroidery frame. It may cause injury or needle breakage.
Si no obtuvo una respuesta, ¿ha revisado otras preguntas frecuentes?
¿Ha revisado los manuales?
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Modelos relacionados Innov-is NS1750D, Innov-is NS1850D, LB5000, LB5500, LB7000, PE535, PE545, PE550D, PE570, SE600, SE625, SE630, SE700, SE725
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Preparativos Coser (puntadas de utilidad) Coser (puntadas decorativas de caracteres) Bordado Funcionamiento Accesorios Mantenimiento Consejo único Información general Coser (puntadas de utilidad) Coser (puntadas decorativas de caracteres) Bordado Preparación Funcionamiento Mensajes de error Mantenimiento Problema general Otros Vídeos de instrucciones
Enhebrado del hilo superior Bobina (devanado/colocación) Enhebrado Pie prensatela Aguja/Hilo/Tela Antes de comenzar a bordar Cómo utilizarlo (preguntas más frecuentes en vídeo) Otros
Aguja/Hilo/Tela Consejos para coser Pedal Cómo utilizarlo (preguntas más frecuentes en vídeo)
Patrones Aguja/Hilo/Tela Consejos para coser
Patrones de bordado Datos de bordado Pie prensatela Aguja/Hilo Tela/Estabilizador Bastidor de bordado Consejos para bordar Cómo utilizarlo (preguntas más frecuentes en vídeo)
Funcionamiento básico Edición Función de memoria Ajustes de la máquina Cómo utilizarlo (preguntas más frecuentes en vídeo) Otros
Accesorios Cómo utilizarlo (preguntas más frecuentes en vídeo)
Limpieza Engrase Mensaje de mantenimiento Cuidados y mantenimiento (preguntas más frecuentes en vídeo)
Consejo único
Información general
Problemas al coser Resultado de la costura Pedal
Problemas al coser Resultado de la costura
Problemas al bordar Resultado del bordado Selección y edición del patrón
Bobina (devanado/colocación) Otros
Ajustes de la máquina Otros
Mensaje de error en la pantalla de la máquina
Problema general
Otros
Preparativos (vídeo) Funcionamiento (vídeo) Coser (vídeo) Bordado (vídeo) Pies opcionales (vídeo) Accesorios generales de costura (vídeo) Cuidados y mantenimiento (vídeo)