CV3440
![]() |
Preguntas frecuentes y solución de problemas |
Stitches are not uniform
Check for the following matters.
-
Probable cause
Adjustment of thread tension is not performed properly.
Remedy
Position "4" on the tension dial is the standard of thread tension.
Start the adjustment with "4" when adjusting thread tension.
When adjusting the thread tension, change the tension dial position little by little and then check the sewing result with trial sewing.Refer to the instructions to learn the adjustment of thread tension.
Instructions for adjustment of thread tension
For fine tune of the thread tension, refer to the comparison chart below.
The different type of the cover stitches and a general guideline for thread tension settings
Preguntas frecuentes relacionadas
- Adjusting the thread tension dials
- Differential feed adjustment
- Adjusting the presser foot pressure
- How to adjust the looper thread tension
- How to adjust the stitch length
- Basic operations and sewing [Video instructions]
- The different type of the cover stitches and a general guideline for thread tension settings.