CV3440
Preguntas frecuentes y solución de problemas |
Needles break
Check for the following matters.
-
Probable cause
The threading on the machine is improper.
Remedy
Make sure that the threads are passed into the machine properly.
Rethread the threads to the machine in an appropriate procedure.Refer to the detailed instructions to learn the threading procedure.
Instructions for threading the machine.
You can also see the instructions for threading on movie.
-
Probable cause
The needle was bent, or the tip of needle was blunt or broken.
Remedy
Replace with a new needle.
-
Probable cause
Needle is installed incorrectly.
Remedy
Reinstall needles correctly.
Make sure that the needle is installed until it touches the needle stopper.Refer to the instructions to learn how to replace the needles.
-
Probable cause
Wrong needle is used.
Remedy
Use a standard home sewing machine needle. The recommended needle is Schmetz 130/705H (90 / #14).
-
Probable cause
The material was pulled forcibly.
Remedy
Do not press or pull material too hard when sewing.