ULT2001/2001N/2001C/2002D/2003D
Preguntas frecuentes y solución de problemas |
"Raise presser foot lever." message appearing on the LCD.
What does it mean?
This message is displayed when the embroidery unit is trying to initialize while the embroidery foot is lowered.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
-
For a correct operation
One beep is sounded. -
If an incorrect operation is performed
Two or four beeps are sounded. -
If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Modelos relacionados
DZ820E, HE1, HE-240, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 900D, Innov-is 950D, Innov-is 990D, LB6770/6770PRW, LB-6800, PC-6500, PE500, PE525, PE540D, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, SB7050E, SB7500, SB7900E, SB8000, SE1800, SE-350, SE-400, SE425, ULT2001/2001N/2001C/2002D/2003D
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.