MFC-J6530DW

Preguntas frecuentes y Solución de problemas

Configure Email Sending or Receiving Using Web Based Management

We recommend using Web Based Management to configure secured email sending with user authentication, or email sending and receiving using SSL/TLS.
To use E-mail Receiving function, go to Downloads section of this website and download the Internet Fax Install Tool.
The installation instructions are available on the download page.
> Click here to download the Internet Fax Install Tool in the Downloads section.

Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2
- If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
  - For example:
  http://SharedPrinter
  If you enable a NetBIOS name, you can also use the node name.
  - For example:
  http://brn[your machine's MAC Address / Ethernet Address]
  The NetBIOS name can be found in the Network Configuration Report.
- For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
Type a password if you have set one, and then click .
Click the Network tab.
Click Protocol in the left navigation bar.
In the POP3/IMAP4/SMTP field, click Advanced Settings and make sure the status of POP3/IMAP4/SMTP is Enabled.
Configure the POP3/IMAP4/SMTP settings.
- Confirm that the email settings are correct after configuration by sending a test email.
- If you do not know the POP3/IMAP4/SMTP server settings, contact your network administrator or Internet Service Provider (ISP).
When finished, click Submit.
The Test Send/Receive E-mail Configuration dialog box appears.
Follow the instructions in the dialog box to test the current settings.

Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.