ADS-1250W

Preguntas frecuentes y Solución de problemas

Preguntas frecuentes y Solución de problemas

Enable the Brother machine's network interface.

Follow the steps below to enable or disable the Brother machine's network interface.

 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Open the Top Cover (1) and the Front Cover (2).
    Open the Top Cover and the Front Cover
  2. Press and hold Scan to PC(Scan to PC) for five seconds.
    After press key five seconds, all LEDs would light one second to notify user command has triggered.
  3. Close the Front Cover.
    Wi-Fi Indicator (with LED) indicates the wireless network is enable or disable.

(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.

If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.

 

¿Ha revisado los manuales?

Si necesita asistencia, contáctese con el servicio al cliente de Brother:

Modelos relacionados

ADS-1250W

Comentarios sobre el contenido

Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.

Paso 1: ¿Cómo lo ayudó la información en esta página?

Paso 2: ¿Quiere agregar otros comentarios?

Observe que este formulario solo se utiliza para comentarios.