MFC-J5945DW

Preguntas frecuentes y Solución de problemas

Preguntas frecuentes y Solución de problemas
  • Fecha: 12/19/2022
  • ID: faq00003059_001

After replacing an ink cartridge, "No Ink Cartridge" or "Cannot Detect" is shown and I cannot print.

If a replacement ink cartridge is not installed correctly, this issue may occur.
Remove the ink cartridge and re-install it slowly and firmly until it locks into place.

 

Follow the steps below to reinstall the ink cartridge:

 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Insert the ink cartridge in the direction of the arrow on the label.
    Insert the ink cartridge in the direction of the arrow on the label
  2. Gently push the area marked "PUSH" until the ink cartridge locks into place.
    Gently push the area marked "PUSH" until the ink cartridge locks into place

    We recommend using genuine Brother supplies to ensure stable print quality and performance. Although not all non-genuine supplies may cause quality issues, using non-Brother supplies or refilling ink cartridges with third party ink, may adversely affect print quality or cause the machine to malfunction. The Brother limited warranty does not apply to any problem caused by the use of third party supplies.

Si no obtuvo una respuesta, ¿ha revisado otras preguntas frecuentes?

¿Ha revisado los manuales?

Si necesita asistencia, contáctese con el servicio al cliente de Brother:

Modelos relacionados

MFC-J1010DW, MFC-J1170DW, MFC-J1205W, MFC-J1215W, MFC-J4335DW, MFC-J4345DWXL, MFC-J4535DW, MFC-J5845DW(XL), MFC-J5945DW, MFC-J6545DW(XL), MFC-J6945DW, MFC-J805DW(XL), MFC-J815DW XL, MFC-J995DW(XL)

Comentarios sobre el contenido

Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.

Paso 1: ¿Cómo lo ayudó la información en esta página?

Paso 2: ¿Quiere agregar otros comentarios?

Observe que este formulario solo se utiliza para comentarios.

Enviar