FAX-2940
 |
Preguntas frecuentes y Solución de problemas |
How do I adjust the handset volume on my Brother machine?
Please follow steps below:
Adjusting Handset Volume:You can adjust your Brother machine's handset volume by following these steps:
Adjusting Handset Volume (For Volume Amplify):
- Press Menu.
- Press the Up or Down arrow key to choose General Setup and press OK.
- Press the Up or Down arrow key to choose Volume and press OK.
- Press the Up or Down arrow key to choose Handset and press OK.
- Press the Up or Down arrow key to choose High or Low and press OK.
- Press Stop/Exit.
You can adjust the handset volume any time you are talking on the telephone, simply by pressing 
or 
. When you change the handset volume, the new setting remains active until you change it again.
- Choosing the Handset Volume (For Volume Amplify):
Before you begin to use the Brother machine, you must decide if you need to set the handset volume to Amplify:On for a user who is hearing-impaired. The AMPLIFY volume level complies with FCC standards.
Vol Amplify:Off This default setting is appropriate if NONE of the users are hearing-impaired. During a conversation, users can press 
or 
on the control panel to adjust the two volume levels (The LCD will display 
). When the handset is replaced, the handset volume will remain until you change it again.Vol Amplify:On
-TemporaryThis setting is appropriate if SOME of the users are hearing-impaired. During a conversation, users can press 
or 
on the control panel to adjust the three volume levels (The LCD will display 
). When the handset is replaced, the handset volume returns to the default setting of Low.Vol Amplify:On
-PermanentPermanent if ALL of the users are hearing-impaired. During a conversation, users can press 
or 
on the control panel to adjust the three volume levels (The LCD will display 
). When the handset is replaced, the handset volume returns to Permanent.
When you press
or 
on the control panel to adjust the volume, the LCD shows the setting you are choosing. Each key press changes the volume to the next setting.It is important that you do NOT choose Permanent unless ALL users are hearing-impaired. Otherwise, the default setting of Volume Amplify may damage the hearing of some users.
- Changing Volume Amplify:
- Press Menu.
- Press the Up or Down arrow key to choose General Setup and press OK.
- Press the Up or Down arrow key to choose Volume and press OK.
- Press the Up or Down arrow key to choose Volume Amplify and press OK.
- Do one of the following:
- If none of this machine's users are hearing-impaired, press the Up or Down arrow key to choose Off and then press OK. Go to STEP g.
- If some or all of this machine's users are hearing-impaired, press the Up or Down arrow key to choose On and then press OK. Go to STEP f.
- If none of this machine's users are hearing-impaired, press the Up or Down arrow key to choose Off and then press OK. Go to STEP g.
- Do one of the following:
- If all the users are hearing-impaired, press the Up or Down arrow key to choose Permanent, and then press OK.
- If only some or all of the users are hearing-impaired, choose Temporary and then press OK.
- If all the users are hearing-impaired, press the Up or Down arrow key to choose Permanent, and then press OK.
- Press Stop/Exit.
- Press Menu.
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
