QL-1060N
常見問題&故障排除 |
I cannot print on the 103 mm wide label roll on a network using the latest printer driver.
You may need to update your printer's paper information using a BLF file if the following situations occur:
- P-touch Editor does not detect the 103 mm wide label roll.
-
The printer's page shows "/" or "102mm/4" in View Configuration > Media Type for Paper Source.
To update the paper information:
-
Download the BLF file:
QL-1060N -
Download BRAdmin Professional from the [Downloads] section of this website to transfer the BLF file to your network-connected printer.
- Start BRAdmin Professional.
- Right-click the printer or print server you want, and select [Load Firmware (Manual)].
- Select [TFTP PUT], and then click [OK].
- Enter the default password (access).
- Select the downloaded BLF file, and then click [OK].
- When the file transfer is complete, turn the printer off and then on again.
- Confirm that the 103 mm wide paper can be selected in P-touch Editor or is shown on the printer's Web Based Management page.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質