To setup the printer, please follow the steps below:

1. Setting the tape cassette

    

   1. Open the cassette cover.
      
   
   
   2. Insert the tape cassette.
      
   
   
   3. Close the cassette cover.
      
      • If you cannot close the cassette cover, check to ensure the white lever is in the up position. If not, lift the lever, and then attach the cover.
      • Make sure that there is no slack in the tape.
      • When setting or removing the tape cassette, make sure that the tape does not catch on the protrusion (1) or the print head.

       

2. Connecting the power supply
   
   Power the P-touch labeler using the AC adapter or batteries.
   
   Using the AC adapter
   
   Plug in the P-touch labeler using the AC adapter.
   
   
   Using the batteries
    
   1. Open the battery cover.
      
   
   
   2. Insert the batteries.
      Make sure that the batteries are correctly oriented.
      
   
   
   3. Close the battery cover.
      

   After completing the printer setup, create a test label. See "Creating a label using P-touch Editor Lite".