TD-2120N
 |
常見問題&故障排除 |
How do I reset network setting?
 |
1. POWER indicator 2.  (Power) button3. Media exit 4. RD/Media Roll compartment top cover 5. STATUS indicator 6.  (Feed) button7.  (Print) button8. Cover release lever |
-
To reset network settings and turn APIPA ON
- Press and hold the Power button to turn the printer off.
- Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
- While holding down the Power button, press the Feed button 2 times.
-
Release the Power button.
All network settings will be reset.
-
To reset network settings and turn APIPA OFF
- Press and hold the Power button to turn the printer off.
- Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
- While holding down the Power button, press the Feed button 4 times.
-
Release the Power button.
All network settings will be reset.
APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.0.1 to 169.254.254.254.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質
