Innov-is F410

常見問題&故障排除

常見問題&故障排除

How do I adjust the sensitivity of the operation keys?

The operation keys do not respond when you wear a glove, press with a fingernail or a non-electrostatic touch pen.

And also, you can adjust the sensitivity of the operation keys to five levels. Display the settings screen to set desired level.

(1) Operation keys

 

  1. Turn off the machine.

     

  2. While pressing  (Reinforcement stitch button) on the operation panel, turn on the sewing machine.

     

  3. Press the “-” or “+” key to select “M 3”.


  4. Adjust the input sensitivity by pressing the “-” or “+” key.
    The lower the setting, the less sensitive the keys will be; the higher the setting, the more sensitive the keys will be. The default setting is “3”.

    We recommend selecting the highest setting if an electrostatic touch pen is being used.


  5. Press any of the operation keys, other than the “-” or “+” key to check the sensitivity. When the key responds, “ON” blinks.
     
  6. Turn off the machine, then turn it on again.

    Before turning off the machine, press any of the keys, other than “-” or “+” key. Otherwise the machine may not save the setting.

 

If the machine does not respond when an operation key is pressed

Turn machine off, then hold down  (Needle position button) and turn on the machine to reset the settings.
Turn off the machine, and then adjust the settings again.

 

你已經查看過使用說明書了嗎?

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質

步驟一: 此頁面的資訊對您有幫助嗎

步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用