CM550DX/ CM550
 |
常見問題&故障排除 |
The mat is fed in at an angle.
Possible Causes (or Results)
Case1 : The mat was inserted into the feed slot at an angle.
Case2 : The corners of the mat are deformed (bent).
Solutions
----- Case1 -----
Press the “Feed” button 
to feed out the mat, and then re-insert it straight in.
----- Case2 -----
Replace the mat with a new one.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質
