Innov-is 20

常見問題&故障排除

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
Before start sewing, baste together the fabric and the hook-and-loop fastener.

Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.