MFC-T910DW

常見問題&故障排除

常見問題&故障排除

Manual Feed

The Manual Feed message appears when MP Tray is selected as the paper source in the printer driver and there is no paper in the MP tray.

Check the solution applicable for your case.

 

CASE A: Print from the MP Tray.

> Click here to see how to load paper in the MP tray.
 
The document will be printed out.

If you want to change the paper source, go to STEP 2 in CASE B.

 

 

CASE B: Print from the Paper Tray.

NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.

 

  1. On the machine's control panel, press Stop/Exit or Cancel(Cancel) to cancel the current print job.
  2. Make sure the paper is not set to the MP tray.
  3. Check the Paper Source setting in the printer driver.

    (Windows)
    1. Open Printing Preference. (Click here to see how to open Printing Preferences.)
    2. Select Auto Select for the Paper Source.
      Paper Source
    (Macintosh)
    1. Open Print dialog. (Click here to see how to open Print dialog.)
    2. Select Print Settings from the print options pop-up menu.
    3. Select Auto Select for the Paper Source.
      Paper Source
  4. Try to print again.

 

你已經查看過使用說明書了嗎?

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質

步驟一: 此頁面的資訊對您有幫助嗎

步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用