PT-H110
 |
SSS ve Sorun Giderme |
How to use the Text Label function
This function allows you to create various labels using the built-in templates.
These templates are available when using 12 mm / 0.47″ wide tape cassettes.
To use the Text Label function, follow the steps below:
Example:
(Template that includes one repeated graphic)
-
Press the [Menu] key.
-
Press the Cursor key (
) to select [Decorative].
-
Press the [OK] key.
[Select Category] is displayed.
-
Press the Cursor key to select [Text].
-
Press the [OK] key.
[Select Design] is displayed.
-
Press the Cursor key (
) until 
appears.
-
Press the [OK] key.
[Input Text] is displayed.
-
Clear the text and then enter the text to be printed.
- You cannot set the Font, Size, Style and Frame while entering texts.
-
To clear the text, move the cursor to the right side where you wish to clear, and then press the Backspace key (
/ 
). -
To clear all text, press the [Clear] key (
/ 
). “All Clear” appears.
Press the [OK] key to clear or the Escape key (
) to cancel.
-
Press the [OK] key.
[Set Label Length] is displayed.
-
Press the Cursor key or the number keys to select your desired label length from [Auto] or 30 – 999 mm (1.2″ - 39.0″).
- Press the Space key to return to the initial setting for “Label Length” mode. The initial setting is [Auto].
- If you set the longer label length than the default ([Auto]), the text label is printed repeatedly within the set length. The text label may not be fully printed depending on the set length.
- The available label length setting changes depending on the number of texts you entered.
-
Press the [OK] key.
[Print] is displayed.To preview labels, press the [Preview] key (
/ 
) when [Print] is displayed on the LCD. -
Press the [OK] key.
[Copies:] is displayed. -
Press the Cursor key or the number keys to specify the number of copies within the range of 1 – 9.
- Press the [OK] key.
-
To exit templates and return to the text input screen, do one of following:
-
Press the Escape key (
). - Press the Cursor key to select [Exit], and then press the [OK] key when [Print] appears.
-
Press the Escape key (
- You cannot save labels created using templates to memory.
- You cannot edit the templates.
- When you access Text Label templates, your most recently printed Text Label template label length is recalled.
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.
