PT-P750W

SSS ve Sorun Giderme

SSS ve Sorun Giderme
  • Tarih: 01/17/2022
  • ID: faqp00001414_001

P-touch Editor Lite pop-up dialog box does not appear when connecting P-touch labeler to my computer.

If the pop-up dialog does not appear, refer to the following:

 

  • Check that the power is ON.

  • Check that the USB cable is correctly connected.

  • Check that the Editor Lite lamp is lit. If not, press and hold down the Editor Lite button until the green Editor Lite lamp lights up.

  • Check that the operating system on your PC is Windows Vista or later.

  • Is it the first time the printer has been connected to your PC?
    When you connect the printer to your PC for the first time, you may encounter a time out by the Windows Shell Hardware Detection service, for example if a process of driver load is delayed finding the printer or it takes a long time to assign the drive letter.

    <Solution>
    Turn off the printer and disconnect the USB cable from your PC, then reconnect and turn on the printer again. You only need to do this process once, and the pop-up dialog box will then appear every time the printer is connected.

  • Even though your PC is supported by Windows Vista or later, the pop-up dialog box may not appear depending on the PC environment.
     

    <Solution>

    For Windows 11 users:
    1. Right-click Start and click File Explorer - This PC.
    2. Double-click your printer's name.
    3. Double-click PTLITE10.EXE to start P-touch Editor Lite.

    For Windows 10 users:

    1. Click Start - (All apps -) Windows System - PC.
    2. Double-click your printer's name.
    3. Double-click PTLITE10.EXE to start P-touch Editor Lite.

    For Windows 8.1 users:

    1. Click This PC in the Apps screen.
    2. Double-click your printer's name.
    3. Double-click PTLITE10.EXE to start P-touch Editor Lite.

    For Windows 8 users:

    1. Click Computer in the Apps screen.
    2. Double-click your printer's name.
    3. Double-click PTLITE10.EXE to start P-touch Editor Lite.

    For Windows Vista and Windows 7 users:

    1. Click Start, and then click Computer.
    2. Double-click your printer's name.
    3. Double-click PTLITE10.EXE to start P-touch Editor Lite.

Sorunuza cevap bulamadıysanız, diğer SSS'leri kontrol ettiniz mi?

Kılavuzlara baktınız mı?

Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:

İçerik Geri Bildirimi

Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.

Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?

Adım 2: Eklemek istediğiniz başka bir yorum var mı?

Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.

Gönder