MFC-J2720

SSS ve Sorun Giderme

SSS ve Sorun Giderme

Document Jam (With Video Instructions)

The document was not inserted or fed properly, or the document scanned from the ADF was too long.
Take out the jammed paper depending on where it is jammed in ADF unit.

 

Click on the image to play the video instructions.

You can see the steps with video clips.
 

  • The clip is being streamed from YouTube. (Opens in a new window.)
  • Your machine may alter what is displayed on this video.

Case1: If the document is jammed in the top of the ADF unit

  1. Take out any paper from the ADF that is not jammed.
  2. Open the ADF cover.
  3. Remove the jammed document by pulling it upward.
    RemoveJammedDocument

     

    • If you cannot remove the jammed paper, open the feed tray(1) and then remove the jammed paper.
      OpenFeedTray
    • Close the feed tray before closing the ADF cover.

     


     

  4. Close the ADF cover.
  5. Press image(Cancel).

    To avoid document jams close the ADF cover correctly by pressing it down in the center.

     

Case2: If the document is jammed inside the ADF unit

 

  1. Remove any paper that is not jammed out of the ADF.
  2. Lift the document cover.
  3. Pull the jammed document out to the right.
             
    PullJammedDocument

     

  4. Close the document cover.
  5. Press image(Cancel).

Case3: If the small document is jammed in the ADF

 

  1. Lift the document cover.
  2. Insert a piece of stiff paper, such as cardstock, into the ADF to push any small paper scraps through.

    image
  3. Close the document cover.
  4. Press image(Cancel).

Sorunuza cevap bulamadıysanız, diğer SSS'leri kontrol ettiniz mi?

Kılavuzlara baktınız mı?

Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:

İçerik Geri Bildirimi

Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.

Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?

Adım 2: Eklemek istediğiniz başka bir yorum var mı?

Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.