Document Jam

This message would appear if the document was not inserted or fed properly, or was too long. To clear this message follow the steps listed below.

 


  1. Open the control panel cover.
  1. Carefully pull the jammed document toward the front of the machine.
  1. Close the control panel cover.
  2. Press Stop/Exit.


If the document jams again, please check the following paper feed rollers.
If there is paper dust, clean the surface of the rollers with a wet lint-free cloth or a cleaner.


NOTE: Illustrations shown below are from the representative product and may differ from your Brother machine.




Sorunuza cevap bulamadıysanız, diğer SSS'leri kontrol ettiniz mi?

Kılavuzlara baktınız mı?

Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:

İçerik Geri Bildirimi

Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.

Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?

Adım 2: Eklemek istediğiniz başka bir yorum var mı?

Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.