HL-5070N
|
SSS ve Sorun Giderme |
Printouts have wrinkles or creases.
Please check the following points:
-
Make sure the paper is loaded properly.
-
-
Turn over the stack of paper in the tray or try rotating the paper 180 degrees in the input tray.
-
Print using the straight-through output path with Manual Feed Tray (For HL-5030 and HL-5040) or Multi-purpose Tray (For HL-5050 and HL-5070N).
Front side
Rear side
Sorunuza cevap bulamadıysanız, diğer SSS'leri kontrol ettiniz mi?
Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:
İçerik Geri Bildirimi
Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.