Model üretimden kaldırıldı. Bu sayfa artık güncellenmiyor.

ERROR XX <-> SERVICE CALL

When any of the following messages appear on the LCD, turn the printer Off, wait 5 seconds and then turn the printer On again. If the alarm continues, perform a Factory Reset as follows:

 

 

  1. Press the - (minus) button until the screen says Reset Menu. The LCD should be amber.
  2. Press the Set button.
  3. Press the + (plus) or - (minus) button until the LCD says Factory Reset, press Set.
  4. The LCD will say OK? confirming your selection. Press the Set button.
  5. The printer will automatically go to a green Ready on the LCD.

     

    If this does not clear the problem, consult your dealer or our authorized service representative.

     
 

Sorunuza cevap bulamadıysanız, diğer SSS'leri kontrol ettiniz mi?

Kılavuzlara baktınız mı?

Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:

İçerik Geri Bildirimi

Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.

Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?

Adım 2: Eklemek istediğiniz başka bir yorum var mı?

Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.