MFC-9120CN

SSS ve Sorun Giderme

SSS ve Sorun Giderme
  • Tarih: 07/09/2015
  • ID: faq00000105_021

Reset the network settings to the factory default (video instructions available)

You can reset the network settings back to its default factory settings (resetting all information such as the password and IP address information) using the control panel as follows. Please note this function resets all wired and wireless network settings to the factory default.

NOTE: Videos shown below are from a representative product and may differ from your Brother machine.

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
 

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  2. Press Menu. Press the Up or Down arrow key to choose Network, and then press OK.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  3. Press the Up or Down arrow key to choose Network Reset, and then press OK.
    Press 1 to choose Reset, and press 1 to choose Yes for reboot.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  4. The machine will re-start. Re-connect all the cables.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)

 

<For touchscreen models>

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  2. Follow the steps below to reset the settings:
    1. Press MENU on the LCD screen.
    2. Press Network.
    3. Press the Up or Down arrow key to display Network Reset and then press Network Reset.
    4. Press Yes.
    5. Press Yes for 2 seconds to confirm.

     

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  3. The machine will re-start. Re-connect all the cables.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)

Sorunuza cevap bulamadıysanız, diğer SSS'leri kontrol ettiniz mi?

Kılavuzlara baktınız mı?

Daha fazla yardıma ihtiyaç duyarsanız, lütfen Brother müşteri hizmetleri ile iletişime geçin:

İçerik Geri Bildirimi

Desteğimizi iyileştirmek için bize yardımcı olmak üzere lütfen aşağıya geri bildiriminizi girin.

Adım 1: Bu sayfadaki bilge size nasıl yardımcı olur?

Adım 2: Eklemek istediğiniz başka bir yorum var mı?

Lütfen bu formun yalnızcı geri bildirim için kullanıldığını unutmayın.

Gönder