Innov-is NV180K
|
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
How to use the foot controller with the machine
You can also use the foot controller to start and stop sewing.
-
When the foot controller is connected, you cannot use the “Start/Stop” button.
-
Bobbin winding can be started and stopped with the foot controller.
-
The foot controller cannot be used when embroidering.
-
Turn off the machine.
-
Insert the foot controller plug into the foot controller jack on the machine.
|
(1) Foot controller jack |
-
Turn on the machine.
-
Slowly depress the foot controller to start sewing.
The speed that is set using the sewing speed controller will be the foot controller’s maximum sewing speed.
-
Release the foot controller to stop the machine.
หากคำถามของท่านยังไม่ได้รับคำตอบ ท่านได้ลองดูคำถามข้ออื่นๆ แล้วหรือไม่?
ท่านได้ลองดูคู่มือแล้วหรือไม่?
หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์
รุ่นที่เกี่ยวข้อง
Innov-is M380D, Innov-is NV180, Innov-is NV180D, Innov-is NV180K
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้