Innov-is NV880E

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

How do I attach or remove the embroidery frame ?

Wind and insert the bobbin before attaching the embroidery frame.

 

Attaching the Embroidery Frame

 

  1. Press the image (Presser Foot Lifter button) to raise the presser foot.

     

  2. Raise the frame-securing lever.
    image (1) Frame-securing lever

    (2) Carriage

     

  3. Align the embroidery frame guide with the right edge of the embroidery frame holder.
     
    image (1) Embroidery frame holder

    (2) Embroidery frame guide

     

  4. Slide the embroidery frame into the holder, making sure to align the embroidery frame’s arrow mark with the one on holder.
    image (1) Arrow mark

     

  5. Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.

    image

    If the frame-securing lever is not lowered, the following message appears.
    You cannot start sewing until you lower the frame-securing lever.

    image

     

Removing the Embroidery Frame

 

  1. Press the image (Presser Foot Lifter button) to raise the presser foot.

     

  2. Raise the frame-securing lever.

    image

     

  3. Pull the embroidery frame toward you.

    image

คำถามที่พบบ่อยที่เกี่ยวข้อง

หากคำถามของท่านยังไม่ได้รับคำตอบ ท่านได้ลองดูคำถามข้ออื่นๆ แล้วหรือไม่?

ท่านได้ลองดูคู่มือแล้วหรือไม่?

หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์

รุ่นที่เกี่ยวข้อง

Innov-is NV800E, Innov-is NV880E

ส่วนแสดงความคิดเห็น

เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้

ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?

ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?

โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น