MFC-1910W

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

Replace Drum

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge.

> Click here to see information for the difference between the toner cartridge and the drum unit.

 

Follow the steps below to clear the Replace Drum message.

 

Replacing the drum unit

  1. Keep the machine powered ON.
  2. Open the scanner cover. The pull-arm (1) on the left side of the machine will lock. Open the top cover.

    CoverOpen
  3. Slowly take out the drum unit and toner cartridge assembly.

    TakeOutDrum
  4. Push down the lock lever (1) and take the toner cartridge out of the drum unit (2).

    TakeOutToner
  5. Unpack the new drum unit and put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically.

    PutToner
  6. Put the drum unit and toner cartridge assembly back into the machine. Close the top cover.

    PutDrum
  7. After pulling the pull-arm (2) on the left side of the machine down, close the scanner cover.

    CloseCover

Reset the drum counter

  1. Press Menu.
  2. Press the Up or Down arrow key to choose Machine Info.. Press OK.
  3. Press the Up or Down arrow key to choose Reset Drum. Press OK for 3 seconds.
  4. Press the Up arrow key to reset the drum unit counter.
  5. Press Stop/Exit.

หากคำถามของท่านยังไม่ได้รับคำตอบ ท่านได้ลองดูคำถามข้ออื่นๆ แล้วหรือไม่?

ท่านได้ลองดูคู่มือแล้วหรือไม่?

หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์

รุ่นที่เกี่ยวข้อง

DCP-1510, DCP-1610W, MFC-1810, MFC-1815, MFC-1910W

ส่วนแสดงความคิดเห็น

เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้

ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?

ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?

โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น