รุ่นนี้ถูกยกเลิกการผลิต หน้านี้จะไม่มีการเปลี่ยนแปลงข้อมูลอีก

HL-4200CN

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

How do I install additional memory?

Follow the procedure below to install additional memory.

 

  1. Turn the printer off, and then unplug the power cord from the AC power outlet/socket.

    Before installing the optional accessories, turn the printer off and remove the power plug from the outlet/socket. Installing optional accessories without turning the printer off could result in an electric shock.

  2. Loosen the two screws on the interface board located at the back of the printer.

  3. Hold the two handles on the interface board and slowly pull the interface board towards you, then lay it on a desk or table.

     

  4. Hold the expansion memory module by the edges and align the notches in the module with the protrusions in the slot.

     

  5. Insert the memory module diagonally (1), then tilt it toward the interface board until it clicks into place (2).

    To remove the memory module, open the retaining clips on both sides of the module by pushing them outward, grasp both edges of the module and pull it out straight.

 

หากคำถามของท่านยังไม่ได้รับคำตอบ ท่านได้ลองดูคำถามข้ออื่นๆ แล้วหรือไม่?

ท่านได้ลองดูคู่มือแล้วหรือไม่?

หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์

ส่วนแสดงความคิดเห็น

เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้

ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?

ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?

โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น