TJ-4020TN
![Vanliga frågor & felsökning Vanliga frågor & felsökning](/g/b/shared/img/module/icon_question_33.png) |
Vanliga frågor & felsökning |
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
Follow the instructions below:
-
Turn off the printer.
-
Press and hold the Pause button, and then turn on the printer.
-
For the Black Mark Sensor
Release the button when the LED is lit in green/amber (5 times) after the green LED blinks five times alternately.
For the Gap Sensor
Release the button when the LED is lit in red/amber (5 times) after the green/amber LED blinks five times alternately.
You can also calibrate by using the BPM (Brother Printer Management Tool).
Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?
Har du tittat efter i manualerna?
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.