Self-test printouts list the printer's configuration and available memory space, and can indicate whether there is any dot damage on the heater component.
Self-test printout
1. Model name
2. F/W version
3. Firmware checksum
4. Printer S/N
5. Configuration file
6. System date
7. System time
8. Printed mileage (meter)
9. Cutting counter
10. Number of bad dot in the print head
1. Print speed (inch/sec)
2. Print darkness
3. Label size (inch)
4. Gap distance (inch)
5. Gap/Black Mark Sensor sensitivity
6. Code page
7. Country code
ZPL setting information
1. Print darkness
2. Print speed (inch/sec)
3. Label size
4. Control prefix
5. Format prefix
6. Delimiter prefix
7. Printer power up motion
8. Printer head close motion
ZPL is emulating for Zebra® language.
RS232 serial port configuration
1.Printer name
2.Mac Address
3.DHCP
4.IP Address
5.Subnet Mask
6.Gateway
7.RAW Port
1. Numbers of download files
Total & available memory space
2. Print head check pattern
Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?