Innov-is XJ2
![Vanliga frågor & felsökning Vanliga frågor & felsökning](/g/b/shared/img/module/icon_question_33.png) |
Vanliga frågor & felsökning |
Cannot thread the needle.
-
Needle is not in the correct position.
Press
(Needle position button) to raise the needle.
![image image](/g/b/img/faqend/faqh00101102_001/eu_ot/en/2284566/faqh102_fg0101.gif) |
(1) Needle Position button |
-
Needle is installed incorrectly.
Reinstall the needle correctly.
Refer to How do I change the needle ?
-
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to How do I change the needle ?
-
Upper threading is incorrect.
Check the steps for threading the machine and rethread the machine.
Refer to How do I thread my machine ?
-
The needle threader hook is bent and does not pass through the eye of the needle.
Contact your authorized Brother dealer.
-
The needle threader lever cannot be moved or returned to its original position.
Contact your authorized Brother dealer.
-
A size 65/9 needle is being used.
The needle is incompatible with the needle threader. Manually pass the thread through the eye of the needle.
Refer to How do I thread my machine ?
Relaterade Vanliga frågor
Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?
Har du tittat efter i manualerna?
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.