FS-40
 |
Vanliga frågor & felsökning |
How do I draw up the lower thread?
- Raise the presser foot using the presser foot lever.
Presser foot lever - Lightly hold the end of the upper thread.
Upper thread - While holding the end of the upper thread, raise the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing
(needle position button) (for models equipped with the needle position button) once or twice.
Mark on the handwheel 
Needle position button - Pull on the upper thread to draw up the lower thread.
Upper thread 
Lower thread - Pull out about 10 cm (4 inches) of both threads and pull them toward the back of the machine under the presser foot.
Upper thread 
Lower thread
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
