QC-1000
 |
Vanliga frågor & felsökning |
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
This message is displayed when the speed control lever is set to control the zigzag stitch width, and the "Start/Stop" button is pushed.
Use the foot controller to operate the machine.
If the operation procedure was correct, the machine will beep once.
If the operation procedure was incorrect, the machine will beep twice or four times.
To turn the alarm on or off, press 
.
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
