ADS-3600W

Vanliga frågor & felsökning

Vanliga frågor & felsökning

Reset the Scheduled maintenance counter

When you clean the pick up roller and reverse roller, you also need to reset the Scheduled maintenance counter by completing the following steps:

NOTE: The screens may differ depending on your operating system and your Brother machine.

Reset the Scheduled maintenance counter only after cleaning the pick up roller and reverse roller.

> Click here to see how to clean the rollers.

  1. Start the ControlCenter application.

    (Windows)
     
    1. Click the ControlCenter4(ControlCenter4) icon in the task tray and select Open from the menu. The ControlCenter4 window appears.
    2. Open the Device Settings.

      [Home Mode]
      Click the Device Settings tab.
      Device Settings
      [Advanced Mode]
      Click the Settings(Settings) icon to access Device Settings.
      Device Settings

    (Macintosh)
     
    1. Click the ControlCenter2(ControlCenter2) icon in the Dock. The ControlCenter2 window appears.
    2. Click the DEVICE SETTINGS tab.
      Device Settings
  2. Click Remote Setup. The Remote Setup window appears.
  3. Select Machine Info. in the navigation tree, select the Scheduled maintenance counter check box, and then click Apply.
    Reset counter for scheduled maintenance alert

Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?

Har du tittat efter i manualerna?

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.

Steg 1: Hur hjälper informationen på den här sidan dig?

Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.