DCP-J772DW

Vanliga frågor & felsökning

Vanliga frågor & felsökning
  • Datum: 2020-01-23
  • ID: faq00100216_512

Set the Machine to Power Off Automatically

The Auto Power Off feature can save power consumption. Set the amount of time that the machine will be in Sleep Mode before it automatically powers off. When this feature is set to [Off], you must power off the machine manually.

To turn on the machine after the Auto Power Off feature has turned it Off, press .

The machine will not power off automatically when:

  • Fax jobs are stored in the machine's memory. (MFC-J491DW/MFC-J497DW)
  • An error prevents the Fax Journal report from printing. (MFC-J491DW/MFC-J497DW)
  • The machine is connected to a telephone line.
  • The machine is connected to a wired network. (MFC-J890DW/MFC-J895DW)
  • The machine is connected to a wireless network.
  • [WLAN Enable] is set to [On] or [WLAN] is selected in the [Network I/F] setting.

DCP-J572DW/MFC-J491DW/MFC-J497DW

  1. Press Settings.
  2. Press or to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Auto Power Off]. Press OK.
    3. Select [Off], [1hour], [2hours], [4hours], or [8hours]. Press OK.
  3. Press Stop/Exit.

DCP-J772DW/DCP-J774DW/MFC-J890DW/MFC-J895DW

  1. Press [Settings]>[All Settings]>[General Setup]>[Auto Power Off].
  2. Press or to display the [Off], [1hour], [2hours], [4hours], or [8hours] option, and then press the option you want.
  3. Press .

Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?

Har du tittat efter i manualerna?

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Relaterade modeller

DCP-J572DW, DCP-J772DW, DCP-J774DW, MFC-J491DW, MFC-J497DW

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.

Steg 1: Hur hjälper informationen på den här sidan dig?

Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.

Skicka