HL-L3230CDW
 |
Vanliga frågor & felsökning |
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface (wired LAN or wireless LAN).
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
- Press the Up or Down arrow key to select Network, and then press OK or Go.
- Press the Up or Down arrow key to select Wired LAN or WLAN, and then press OK or Go.
- Press the Up or Down arrow key to select Wired Enable or WLAN Enable, and then press OK or Go.
- Press the Up or Down arrow key to select On or Off.
- Press OK or Go.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Relaterade Vanliga frågor
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- The printer status is Offline or Paused.
- My Brother machine could not be found over the network when I installed drivers on my computer.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print on a wireless (Wi-Fi) network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
