Modellen har upphört. Denna sida uppdateras inte längre.

HL-1270N

Vanliga frågor & felsökning

Vanliga frågor & felsökning

I cannot install the Windows 7 built-in drivers from the Windows Update provided by Microsoft®.

If you get an error like the following, please check the following points.

Error

Error
  • Internet Connection:
    The Windows Update requires an Internet connection. Please make sure that your computer is connected to the Internet.

  • Device Installation Settings:
    Follow the steps below to check the setting.
    1. Click Start => Control Panel => System and Security => System.
    2. Click Advanced system settings.
      System

    3. Click Hardware tab and Device Installation Settings.
      System Properties

    4. Make sure that the option "Yes, do this automatically (recommended)" is selected.
      - If the option "Yes, ... " is selected, click Cancel to close the Device Installation Settings dialog, and then click Cancel to close the System Properties dialog.

      - If not, please select the option "Yes, ... " and click Save Changes to save the setting, and then click OK to close the System Properties dialog.
      Device Installation Settings

Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?

Har du tittat efter i manualerna?

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Relaterade modeller

DCP-110C, DCP-4020C, DCP-8020, DCP-8040, FAX-1820C, FAX-1840C, HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2460, HL-4000CN, HL-4200CN, HL-5030, HL-5040, HL-5050, HL-5070N, HL-5130, HL-5140, HL-5150D, HL-5170DN, MFC-210C, MFC-3220C, MFC-3240C, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-4820C, MFC-580, MFC-5840CN, MFC-590, MFC-620CN, MFC-8420, MFC-8440, MFC-8820D, MFC-8840D, MFC-890, MFC-9070, MFC-9160, MFC-9180, MFC-9660, MFC-9880

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.

Steg 1: Hur hjälper informationen på den här sidan dig?

Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.