MFC-9320CW

Vanliga frågor & felsökning

Vanliga frågor & felsökning

Document Jam

The document was not inserted or fed properly, or the document scanned from the ADF was too long.
If the document is jammed, follow the steps below:

 

After removing a jammed document, check that no paper scraps are left in the machine that could cause another jam.

 


If the document is jammed in the top of the ADF unit

  1. Take out any paper from the ADF that is not jammed.
  2. Open the ADF cover.
  3. Pull the jammed document out to the left.
    jammed in the top of the ADF unit
  4. Close the ADF cover.
  5. Press Stop/Exit.

 

If the document is jammed under the document cover

  1. Take out any paper from the ADF that is not jammed.
  2. Lift the document cover.
  3. Pull the jammed document out to the right.
    jammed under the document cover
  4. Close the document cover.
  5. Press Stop/Exit.

 

If the document is jammed at the output tray

  1. Take out any paper from the ADF that is not jammed.
  2. Pull the jammed document out to the right.
    jammed at the output tray
  3. Press Stop/Exit.

Relaterade Vanliga frågor

Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?

Har du tittat efter i manualerna?

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.

Steg 1: Hur hjälper informationen på den här sidan dig?

Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.