MFC-J480DW
 |
Vanliga frågor & felsökning |
Forward a fax to another fax machine when my machine has a mechanical problem.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the LCD:
-
Unable to Clean XX (Clean Unable XX)
-
Unable to Initialize XX or Unable to Init. XX (Init Unable XX)
-
Unable to Print XX (Print Unable XX)
-
Unable to Scan XX (Scan Unable XX)
-
Press Stop/Exit to interrupt the error temporarily.
-
Press Settings or Menu and select Service => Data Transfer => Fax Transfer.
-
Do one of the following:
-
If the LCD shows No Data, there are no faxes left in the machine's memory.
Press Stop/Exit.
-
Enter the fax number to which faxes will be forwarded.
-
Press Black Start or Mono Start.
-
If you have not set up your Station ID, you cannot enter fax transfer mode.
> Click here to see how to set up the Station ID.
-
You can send the Fax Journal report to another fax machine.
Press Settings or Menu and select Service => Data Transfer => Report Trans. in Step 2.
Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?
Har du tittat efter i manualerna?
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Relaterade modeller
DCP-J140W, MFC-250C, MFC-290C, MFC-295CN, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-J410, MFC-J430W, MFC-J470DW, MFC-J480DW, MFC-J615W, MFC-J6510DW, MFC-J6710DW
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
