FAX-1820C
 |
Vanliga frågor & felsökning |
How do I program the date and time?
To set the date and time, follow the instructions listed below:
-
Press the Menu/Set or Menu key on the Control Panel.
-
Press the up or down navigation key and select Initial Setup, then Date/Time.
-
The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 06 for 2006).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
-
Press the Menu/Set or Menu key .
-
The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
-
Press the Menu/Set or Menu key .
-
Press the Stop/Exit key on the Control Panel.
The LCD will display the date and time whenever the unit is idle.
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
