HL-1270N
 |
Vanliga frågor & felsökning |
Why are all the lights blinking then the drum light blinking?
It indicates Fuser Malfunction.When any of the following error is indicated, turn the printer Off, wait 5 seconds and then turn the printer On again.
If the alarm continues, perform a Factory Reset:
-
Turn the printer off.
-
Hold in the circular button on the front panel of the printer.
-
Turn the printer back on.
-
When the DRUM light is lit by itself let go of the button.
-
Hold in the circular button on the front panel again.
-
Once the Alarm light comes on, let go of the button.
-
This has performed a factory reset on the printer.
If this does not clear the problem, consult your dealer or our authorized service representative.
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
