HL-2240D

Vanliga frågor & felsökning

Vanliga frågor & felsökning

Clean the corona wire of the drum unit.

Please follow the steps below to solve the problem:

  • DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine.
    Do Not Use
  • Be careful not to inhale toner.
  1. Open the front cover and leave the machine for at least 10 minutes to cool down.

    image

  2. Take out the drum unit and toner cartridge assembly.

    image

    • We recommend that you place the drum unit and toner cartridge assembly on a clean, flat surface with a piece of disposable paper underneath it in case you accidentally spill or scatter toner.
    • To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration.
      image
  3. Clean the primary corona wire inside the drum unit by gently sliding the green tab from right to left and left to right several times.

    Be sure to return the tab to the home position (Image) (1). If you do not, printed pages may have a vertical stripe.



    image


  4. Put the drum unit and toner cartridge assembly back into the machine. Close the front cover.

    image

Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?

Har du tittat efter i manualerna?

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.

Steg 1: Hur hjälper informationen på den här sidan dig?

Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.