MFC-8950DWT

Vanliga frågor & felsökning

Vanliga frågor & felsökning

Page skewed

Print Quality Problem - Page skewed

 

Please check the following points to solve the problem:


NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  • Make sure that the paper guides are set correctly. If the guides are too tight or too loose against the paper stack, slide the paper guides to fit the paper size.

    Slide paper guide

  • If you are using the MP tray, make sure the paper guides touch the side of the paper and the paper stays under the maximum paper mark (1).


    For Printer models:


    Under maximum paper mark

    For MFC/DCP models:


    Under the maximum paper mark

  • The paper tray may be too full. Make sure that the paper is below the maximum paper mark (1). If the paper is over the maximum paper mark, reduce the quantity of paper until the maximum paper mark appears.

    Below maximum paper mark

  • Check the paper type and quality.
    Please refer to FAQs "What kind of paper can I use? " and "What is the recommended paper?"

  • Check for loose objects such as torn paper inside the machine.

  • If the problem only occurs during 2-sided(duplex) printing, check for torn paper in the duplex tray, verify that the duplex tray is inserted completely and verify that the back cover is closed completely.

 

Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?

Har du tittat efter i manualerna?

Om du behöver mer hjälp kontaktar du Brothers kundtjänst:

Feedback om innehållet

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.

Steg 1: Hur hjälper informationen på den här sidan dig?

Steg 2: Vill du lägga till ytterligare kommentarer?

Observera att detta formulär endast används för feedback.