TJ-4021TN
|
Întrebări frecvente şi depanare |
How to clean the Platen Roller
Clean the Platen Roller when replacing the label roll with a new one.
To clean the Platen Roller, follow the steps below:
-
Turn off the printer.
-
Open the Media Cover.
-
Push the Print Head Release Lever to open the Print Head.
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
-
Close the Print Head by pushing down on both sides and make sure it locks into place.
-
Close the Media Cover.
Calibrate the Gap/Black Mark Sensor every time you change the media.
Întrebări frecvente asociate
Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.