CM840
![Întrebări frecvente şi depanare Întrebări frecvente şi depanare](/g/b/shared/img/module/icon_question_33.png) |
Întrebări frecvente şi depanare |
The material being cut catches on the tip of the cutting blade.
Possible Causes (or Results)
Case1 : Dust or lint has accumulated in the holder.
Case2 : The blade is worn.
Case3 : The material being cut is incompatible with this machine.
Solutions
----- Case1 -----
Clean the holder.
>> For details, see “Cleaning the holder”.
![img](/g/b/img/faqend/faqh00000700_000/eu_ot/en/34277/faqh700_fig0001.gif)
----- Case2 -----
Replace the blade with a new one.
>> For details, see “Replacing the blade”.
----- Case3 -----
Replace the material with one compatible with this machine.
>> For details, see “Preparation of craft paper / fabric”.
Întrebări frecvente asociate
Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.