Innov-is 4000D/4000
Întrebări frecvente şi depanare |
When thread got tangled.
-
When a machine stops operation due to tangled thread, do not turn the pulley by force.
If the pulley is turned by force then, lower thread might not be picked up correctly and stitches might not be formed correctly.
- If threads get tangled, remove a needle plate and cut the tangled threads by scissors or cutter.
Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Modele asociate
BC-2100/2300, BC-2500, BM-3500/2600, BN27, BN37, BQ17, BQ25, CS-8060, DS-120, DS-140, FS100WT, FS-20, FS-40, FS60, FS70WT, HF27, HF37, Innov-is 10/10A, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 55, Innov-is 55FE, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, J14, J17, KD144, KD40, KE14, KE20, LS-1217, LS-1717, LS-2125, NX-200, NX-2000, NX-400Q/400, PE-150V, PQ1600S, PS-53/55/57, PX-100/200/300, SuperGalaxie 3000/3000C/3000D/3100D, X14, XL-2120/2220/2230, XL-5010/5020/5030, XL-5500, XL-5600, XL-5700, XL-6053/6063, XT27, XT37