HL-4150CDN

Întrebări frecvente şi depanare

Întrebări frecvente şi depanare

Replace WT Box

DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock.

image


To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration.

image


 




Replace the waste toner box following the steps below:

  1. Make sure that the machine is turned on. Press the front cover release button and then open the front cover.


    image



    image



  2. Hold the green handle of the drum unit. Pull the drum unit out until it stops.


    image



    image



  3. Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine.


    image


  4. Hold the green handle of the belt unit with both hands and lift the belt unit up, then pull it out.

    image



    image


  5. Remove two pieces of orange packing material and discard them.


    image




    This step is only necessary when you are replacing the waste toner box for the first time, and is not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment.



  6. Remove the waste toner box from the machine using the green handle.


    image


  7. Unpack the new waste toner box and put the new waste toner box in the machine using the green handle. Make sure the waste toner box is level and fits firmly into place.


    image


  8. Slide the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place.

    image


    image


  9. Make sure the green lock lever (1) is in the release position as shown in the illustration.

    image


  10. Match the guide ends (2) of the drum unit to the right arrow marks (1) on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever.

    image


  11. Turn the green lock lever (1) clockwise to the lock position.

    image


  12. Push the drum unit in until it stops.

    image



    image


  13. Close the front cover of the machine.


Discard the used waste toner box according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office.


 

Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?

Aţi verificat manualele?

Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:

Modele asociate

HL-4140CN, HL-4150CDN, HL-4570CDW

Spuneţi-vă părerea despre conţinutul furnizat

Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.

Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?

Pasul 2: Doriţi să adăugaţi comentarii?

Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.