MFC-L9670CDN
 |
Întrebări frecvente şi depanare |
Colored spots at 94 mm (3.7 in.) intervals or at 29 mm (1.1 in.) intervals
Follow the steps applicable for your case to resolve the issue:
- Case 1: Colored spots at 94 mm (3.7 in.) intervals
- Case 2: Colored spots at 29 mm (1.1 in.) intervals
Case 1: Colored spots at 94 mm (3.7 in.) intervals
-
If the issue is not resolved after printing a few pages, the drum may have foreign material, such as glue from a label, stuck on the drum surface. Clean the drum unit.
> Click here to see how to clean the drum unit. -
Install a new drum unit.
> Click here to see how to replace the drum unit.
Case 2: Colored spots at 29 mm (1.1 in.) intervals
- Identify the color causing the issue and install a new toner cartridge.
-
To identify the color of the toner cartridge and replace toner cartridge, follow the steps below:
- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
