MFC-8840D
 |
Întrebări frecvente şi depanare |
Can I reduce the size of a received fax on this machine?
-
Yes, your machine can automatically reduce the size of an incoming fax to fit the size of the paper in your machine. To set AUTO REDUCTION mode ON, follow the instructions listed below:
-
If the FAX mode key is not illuminated in green, press it.
-
Press the Menu key on the control panel.
-
Press the up or down navigation key until Fax appears on the LCD and press Set.
-
Press the up or down navigation key until Setup Receive appears and press Set.
-
Press the up or down navigation key until Auto Reduction appears and press Set.
-
Press the up or down navigation key until ON (or OFF) appears and press Set.
-
Press Stop/Exit.
-
Verify the Paper Size is set correctly. Follow the instructions listed below:
- Press the Menu key.
- Press the up or down navigation key until General Setup appears on the LCD and press Set.
- Press the up or down navigation key until Paper Size appears and then press Set.
- Use the up or down navigation key to select the correct size and press Set.
- Press Stop/Exit.
When your MFC has the optional paper tray installed, choose tray #1 or tray #2.
Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?
Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:
Spuneţi-vă părerea despre conţinutul furnizat
Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.
